Bull - Soft Touch Plastic - Blood Red (3)_whiteBG
Bull - Soft Touch Plastic - Blood Red (3)Bull - Soft Touch Plastic - Blood Red (4)Bull - Soft Touch Plastic - Blood Red (2)Bull - Soft Touch Plastic - Blood Red (1)Bull - Soft Touch Plastic - Blood Red (5)Bull - Soft Touch Plastic - Blood Red (6)Bull - Soft Touch Plastic - Jersey Yellow (3)Bull - Soft Touch Plastic - Jersey Yellow (4)Bull - Soft Touch Plastic - Jersey Yellow (2)Bull - Soft Touch Plastic - Jersey Yellow (1)Bull - Soft Touch Plastic - Jersey Yellow (5)Bull - Soft Touch Plastic - Jersey Yellow (6)Bull - Soft Touch Plastic - Pure Black (3)Bull - Soft Touch Plastic - Pure Black (4)Bull - Soft Touch Plastic - Pure Black (2)Bull - Soft Touch Plastic - Pure Black (1)Bull - Soft Touch Plastic - Pure Black (5)Bull - Soft Touch Plastic - Pure Black (6)

Trophy Bull – Soft-touch Plastic Finish

4.75 out of 5
(4 customer reviews)

$115.00 (excl. VAT)

Give your bike the platform it deserves. Iconic bull head silhouette crafted from solid steel with soft-touch plastic coating to avoid damage to your bike frame.

Durable soft-touch plastic coating is wipe-clean; perfect for those who keep their bikes on the dirty side, plus it looks like a piece of wall-art – even without your bike on!

Suitable for indoor and external use (with the Outdoor Fixing Pack)

Click on the tabs below for more product information.

Select your colour from the drop-down box below ↓

Clear selection
SKU: n/a. Category: . Tags: , .

Product Info

Item includes 1x Trophy Bull bicycle holder and colour-coded fixings suitable for fitting to most brick, timber and masonry walls. Stud Wall Fixing Pack sold separately.

Easy installation with clear instructions supplied (see the ‘Installation Guide’ tab for details). Suitable for one bicycle up to a maximum weight of 20kg.

Soft-touch Plastic finish provides a soft surface for your bike to sit on (always place and remove your bicycle gently).

Designed and manufactured in the UK.

Additional Information

Weight 2.5 kg
Dimensions 47 x 44 x 23 cm

Installation Guide

Downloads

Installation Instructions - Brick & Timber Walls

Installation Instructions - Stud Walls

4 reviews for Trophy Bull – Soft-touch Plastic Finish

  1. Diane B.
    4 out of 5

    :

    Really impressed with the bike holder, just what I hoped for. The delivery was quick, well packaged, so arrived in perfect condition. It is a really cool looking item with or without the bike on it.
    Many thanks,

  2. Evy F.
    5 out of 5

    :

    Bought it as a present for my boyfriend…he totally loved it.

  3. Melinda G.
    5 out of 5

    :

    I ordered three and LOVE them! They are hanging beautifully in my garage and were easy to install as well as very good looking!! I might just order more!
    Thank you for a great, good looking, easy to use bike rack!

  4. Cath D.
    5 out of 5

    :

    Well, we have our dining room back and now only 3 bikes in the cupboard under the stairs! When they first went up they did dominate the space slightly, but now we are used to the bikes being there it is rather lovely. And when
    I’m not riding my bike, I get to look at it! The plasticisation protects the bikes really well, although both racks are holding carbon road bikes so we’re not really testing the load bearing.

Add a review

Bike Fitment

Trophy will hold most kinds of road, hybrid, mountain and child bikes that can be held at two balance points. These are spaced at approx. 41cm (Bull) and 38cm (Deer) apart.
We recommend you run a tape measure across and check your frame has enough internal clearance.

The handle bars of most bikes will tilt slightly to allow the frame to hang square. If you have very wide handlebars (over 60cm), the front wheel may have to be steeply angled to allow it fit against the wall; please bear this in mind when choosing a location for your Trophy. We advise you take some measurements of your frame if you are in any doubt.

Check out our Dimensions Sheet for more information.